Work

Effect of Height Difference Between Adjacent Liquid Injection Holes on Wetting Body Evolution of Ion-Absorbed Rare Earth In Situ Leaching Ore

Year: 2026

Type: article

Abstract: This study investigated wetting body migration and blind area distribution variations under different height differences (Δh) using indoor experiments and numerical simulations. Results show that the Δh of the injection hole shifts the wetting body intersection backward. Due to the increase in Δh, the vertical migration of the wetting peak at the No. 1 liquid injection hole accelerates, and the horizontal migration tends to be stable, which indicates that the Δh promotes the vertical seepage by changing the hydraulic gradient, which is beneficial to accelerate the leaching process. The migration of the wetting peak presents the characteristics of ‘fast first and then slow’, and it is easy to form a blind area in the later stage of leaching. When Δh is 0 and 3 cm, the blind area is concentrated between the two holes in the upper part of the ore heap. When Δh increases to 5 and 7 cm, the blind area expands to the top of the No. 1 hole. The simulation results show that although the increase in Δh can accelerate the recovery of water pressure in the near-end injection hole, it will increase the difference in leaching efficiency between ‘near-end’: when Δh is small, the wetting body diffuses symmetrically and the blind area is easy to eliminate; the increase in Δh leads to the asymmetric migration of the wetting body, and the remote area faces a significant risk of a blind area due to a low water pressure and low concentration.

Source: Metals

DOI: 10.3390/met16020232