Work

Näytteiden identifiointimenetelmän muutos laboratorioyrityksessä : Vaihtoehtoisten identifiointimenetelmien kartoitus Fimlab Laboratoriot Oy:lle

Year: 2025
Type: dissertation
Abstract: Lääketieteellisten laboratorioiden toiminnan ytimessä ovat laboratorionäytteet. Kaikki näytteet on identifioitava, jotta ne voidaan yhdistää potilaaseen myös näytteenottotilanteen jälkeen ja ne voidaan yksilöidä oikeiden tutkimusten tekemistä varten. Fimlabin nykyinen näytteiden identifiointimenetelmä perustuu näytteenottohetkellä tulostettaviin ja liimattaviin tarroihin, jotka sisältävät näytenumeron ja potilaan ja näytteen tietoja. Tämä menetelmä ei kuitenkaan ole täydellinen ja siihen liittyvien ongelmien ratkaisemiseksi on hyvä selvittää myös muita vaihtoehtoja. Tässä diplomityössä selvitetään paras keino korvata nykyinen identifiointimenetelmä, mitä tietojärjestelmämuutoksia uudistukseen liittyisi ja arvioidaan uuden identifiointimenetelmän kustannuksia. Näiden tavoitteiden saavuttamiseksi luodaan katsaus kliinisten laboratorionäytteiden identifioinnin teoriaan ja vaihtoehtoihin, haastatellaan Fimlabin henkilöstöä vaihtoehtojen vertailukriteerien selvittämiseksi, lasketaan vaihtoehtojen kustannuksia ja tehdään riskienhallintasuunnitelma. Lopputuloksena saatiin ehdotus uudesta identifiointimenetelmästä, tehtävistä tietojärjestelmämuutoksista ja tietotekniikkahankinnoista sekä arvio uudistuksen vaatimista kustannuksista. Parhaaksi identifiointimenetelmäksi osoittautui uniikin putkinumeron ja sitä vastaavan yksiulotteisen viivakoodin sisältävät etiketit, jotka liimataan putkiin automaattisesti Fimlabin hankkimalla suurikapasiteettisella etiketöintiautomaatilla keskitetysti ennen putkien toimittamista näytteenottopisteisiin. Näytteenoton yhteydessä potilaalta otettaville näytteille luodaan tekninen näytenumero nykyisen prosessin mukaan, ja näytteenoton onnistuttua otettujen putkien numerot liitetään laboratoriotietojärjestelmässä näihin teknisiin näytenumeroihin potilaan läsnä ollessa. Ehdotettu identifiointimenetelmä tarjoaisi merkittäviä etuja näytteiden kanssa työskentelyyn. Kun etiketit liimataan keskitetysti ja automaattisesti, ei etiketöinti vaadi juurikaan käsityötä ja inhimilliset virheet etiketin asettelussa poistuvat. Näin tarrojen tulostamisen vikatilanteet voitaisiin ratkaista keskitetysti häiritsemättä näytteenottoa ja virheellisesti asetettujen etikettien korjaamiseen käytettyä aikaa saataisiin vähennettyä. Nämä olisivat suuria parannuksia nykyiseen prosessiin, jossa edellä mainitut haasteet on selvitettävä putki tai tarratulostin kerrallaan. Uuden menetelmän toteuttamiseksi vaaditaan kehitystä tietojärjestelmiin ja esimerkiksi näytteenotossa käytettävään sovellukseen on kehitettävä moduuli putkinumerojen lukemiseksi ja yhdistämiseksi näytenumeroihin. Myös näytteen tietojen tarkistamiseksi helposti mobiililaitteilla on kehitettävä tähän tarkoitukseen suunniteltu ja mobiililaitteille skaalattu näkymä nykyiselle Näytteen tiedot -moduulille. Suuri osa teknisestä prosessista on kuitenkin toteutettavissa nykyisillä järjestelmillä, sillä jo nyt on mahdollista analysoida näytteitä muilla kuin Fimlabin omilla näytenumeroilla. Ehdotetun menetelmän kustannusten arvioinnin perusteella uusi menetelmä voi mahdollistaa myös merkittäviä säästöjä, kun materiaali- ja laitekulut pienenevät. Todelliset kustannukset selviävät vasta, jos uutta menetelmää lähdetään toteuttamaan ja etiketöintiautomaattien kilpailutuksessa saadaan selville laitteiden todelliset kustannukset. Diplomi-työssä esitettyjen laskukaavojen perusteella voidaan kuitenkin arvioida kustannustehokkuutta myös tällöin. Tämä diplomityö on tehty toimeksiantona Fimlab Laboratoriot Oy:n tietohallinnolle ja sen perusteella Fimlab voi arvioida, onko näytteiden identifiointimenetelmän uudistaminen kannattavaa ja ovatko työssä tunnistetut ja arvioidut riskit sellaisia, jotka voidaan hyväksyä tai käsitellä tavoilla, joita tässä työssä ei löydetty. Muutos olisi merkittävä uudistus Fimlabin toimintaan ja jos se päätetään toteuttaa, tarvitaan vielä uusia tarkempia selvityksiä ja pilottiprojekti. Laboratory samples are at the centre of clinical laboratories and Fimlab Laboratoriot Oy is no different. All samples must be uniquely identified so they can be linked to the patient and the requested tests even after the sample is collected. Fimlab's current identification method is based on sticker labels that are printed and attached to the samples by the phlebotomist at the time of sample collection. This method enables including detailed patient and sample information to the label, yet it is not perfect. Therefore, this thesis looks for alternative methods. This thesis aims to find the best alternative to the current identification method, define the needed changes in Fimlab's information systems and estimate the costs of the best identification method. Several methods are used to achieve these aims. A literature re-view is conducted about alternative identification methods of clinical laboratory samples and related theory, Fimlab's staff is interviewed to formulate the comparison criteria for evaluating the found alternatives, costs are calculated, needed software changes are recognised, and risk management plan is crafted. These methods showed that the best alternative to the current identification method would be acquiring a high-capacity labelling machine for Fimlab which would label all sample tubes with a unique tube number and respective barcode before the tubes are shipped to the service units. When the sample is collected, a technical sample number is generated as in current process and the technical number and the tube's number are connected in a laboratory information system in the patient's presence. Work related to samples would benefit from the suggested identification method. Auto-mated labelling would reduce time spent on labelling and relabelling the sample tubes and human errors related to these tasks would be eliminated. Furthermore, issues related to label printers would be solved centrally. Thus, more time could be spent on the staff's principal tasks. The new identification method would require software development. New functionality for managing the reading of tube numbers and connecting them to the correct samples would be needed. Another major development task would be a new user interface for the current Specimen-microservice to facilitate reading the specimen information on mobile devices. Additionally, some other changes would be needed, but most of the process is readily implementable at present. The estimation of the new identification method's costs showed that significant savings could be made as material and device costs would be reduced. The actual costs can only be defined if the new method would be implemented, and competitive tendering would be needed to reveal the real costs. However, the formulas presented in this thesis can be utilised to evaluate cost efficiency of the offered solutions as well. This thesis is made as an assignment from Fimlab Laboratoriot Oy's information technology department and based on the findings presented in it, Fimlab can decide if renewal of the identification method is appealing, and that the recognised risks are such that can be accepted or mitigated. The change would be a remarkable change to Fimlab's functions and therefore more investigations and a pilot project would be needed before full-scale deployment.
Language: Finnish
Open Access status: green
OpenAlex ID: W7132994225
Cites: 21
Cited by:
Related to: 10