Influences of Inclination Angles and Loading Scenarios on the Elasto-Plastic Stability of a Steel Basket-Handle Arch Structure
Year: 2026
Type: article
Abstract: This study investigates the effects of an arch rib inclination angle and loading scenario on the elasto-plastic stability of steel basket-handle arches to support bridge design. A parametric finite element analysis was performed on 48 models, with inclination angles ranging from 0° to 15° under three vertical loading conditions: uniformly distributed (V), transversely eccentric (V1), and longitudinally eccentric (V2). A nonlinear analysis was conducted using the arc-length method. The results indicate that the ultimate bearing capacity is highest under loading V, followed by V1 and V2, irrespective of the inclination angle. The initial stiffness increases monotonically with inclination in all cases. Under V, the capacity peaks at a 10° inclination before declining, with a corresponding transition from out-of-plane to in-plane buckling at this critical angle. Under V1, out-of-plane buckling dominates, and the capacity fluctuates slightly before increasing with the inclination. Under V2, in-plane antisymmetric buckling prevails, and the capacity decreases gradually as the inclination increases. Eccentric loading induces severe stress concentration and local buckling at the arch feet, accelerating global failure. It is concluded that an inclination angle up to 10° enhances elasto-plastic stability under symmetric vertical loading, whereas eccentric loading substantially reduces the capacity; therefore, symmetric and simultaneous loading on both arches is recommended during construction.
Source: Buildings
Authors: Zijing Zhang, Zhanfei Wang, Qiang Zhang, Jia Chen
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7133552276