Experimental study on annealing S45C steel: effect of temperature and time on hardness, impact strength
Year: 2026
Type: article
Abstract: Steel generally exhibits poor wear and friction resistance, making it necessary to improve its surface mechanical properties, particularly hardness and microstructure, to enhance performance. Heat treatment is one of the most effective methods for achieving these improvements. This study aimed to optimize the heat treatment parameters of S45C medium-carbon steel to improve hardness and impact strength using response surface methodology (RSM). Experimental trials were conducted at annealing temperatures of 800 °C, 850 °C, and 900 °C with holding times of 30, 60, and 90 minutes, followed by cooling in water, oil, or air. Hardness (HRC) and impact strength (Nm/mm²) were measured, and the data were analyzed using RSM with a central composite design (CCD). Quadratic models were found to be statistically significant for both hardness (Prob > F = 0.0222) and impact strength (Prob > F = 0.0338), confirming their validity. The optimization results indicated that a holding time of 60 minutes within the 850-900 °C range provides the best balance between high hardness (>55 HRC) and adequate impact strength (>0.68 Nm/mm²). These findings not only validate the predictive capability of RSM in heat treatment optimization but also provide practical guidelines for industrial applications of S45C steel in automotive, tooling, and structural components.
Institutions: Politeknik Negeri Ujung Pandang, State University of Makassar
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7134067710
