Work

Polypyrrole / Poly(acrylonitrile-co-methylacrylate) Nanocomposites, Nanofibers And Their Characterizations

Year: 2012
Type: dissertation
Abstract: This study can be categorized into two parts, firstly obtaining Polypyrrole/Acrylonitryle-co-Methylacrylate latexes that obtained by emulsion polymerization, secondly obtaining nanofibers by electrospinning method from the precipitated form of these nano-composites. Emulsion polymerization of Acrylonitrile (AN) and Methylacrylate (MA) was performed in the aqueus medium with the precence of surfactant Dodecyl Benzen Sulfonic Acid (DBSA) and initiator Potassium Persulfate (KPS). Then pyrrole (Py) droplets are added into emulsion latexes and reaction continued with the left initiator. Finally nanoparticles of Ppy/P(AN-co-MA) are sampled and the morphology is characterized by Scanning Electron Microscopy(SEM). Also the nanoparticle size is determined by Particle Size Analyzer and measuring on SEM images. Nanoparticles were obtained as 83-103 nm diameter changing by the different polypyrrole amounts. Then dried composites were dissolved in Dimethyl Formamide (DMF) and electrospinned by an electrospinning device that contains a power supplier, pump, syringe and metal collector. The distance between collector and syringe, solution percentage by weight, applied voltage was not changed by trials. At the end of the electrospinning, nanofibers were obtained in the range of 200-700 nm diameter. The DMF containing solution of nanocomposites were poured into special surfaces and films are obtained. Nanofibers are characterized by SEM and Dynamic Mechanic Analyzer (DMA). Dried particles are chacterized by both Fourier Transform Infrared-Attenuated Total Reflectance (FTIR-ATR), UV-Visible Spectroscopy and Differantial Scanning Calorimetry (DSC). Uv-Visible Spectroscopy results are and it was observed that the UV-Visible absorption is directly proportional with the particle size of nanoparticles. DSC analysis showed that the glass transition temperature is increased by the increasing pyrrole addition . The films were chacterized by DMA as obtaining stress-strain curves, and it was seen that the Young’s Modulus of films are increased by increasing amounts of pyrrole added.
Language: English
Open Access status: green
OpenAlex ID: W7134418271
Cites: 80
Cited by:
Related to: 10