Year: 2026
Type: dissertation
Abstract: The increasing number of mobile devices and the growing demand for higher data rates require continuous evolution of communication systems. Achieving higher data rates involves using wider bandwidths, which conflicts with the finite nature of the frequency spectrum. Therefore, improving spectral efficiency is essential. In theory, spectral efficiency can be doubled compared to currently used half-duplex systems by employing full-duplex (FD) antennas due to their ability to receive and transmit signals simultaneously on the same frequency. However, a major problem with using FD antennas is the strong self-interference signal arriving at the receiver (Rx) from the system's own transmitter (Tx). The aim of this thesis is to study isolation techniques that reduce self-interference and to evaluate their suitability for future communication systems. Although high isolation levels can be achieved, they typically involve trade-offs in bandwidth, efficiency, size, and radiation pattern similarity between the Tx and Rx paths. To study these trade-offs, the thesis presents a comprehensive literature review of isolation techniques. The techniques are compared, and their pros and cons are discussed. Based on this review, a shared-radiator FD antenna operating within the FR3 frequency band (7.125--24.25\,GHz) is proposed. The design consists of a rectangular patch antenna connected to a Wilkinson power divider, which splits the antenna feed into separate Tx and Rx paths. The use of a shared radiator enables correlated Tx and Rx radiation patterns and a compact form factor suitable for antenna arrays and multiple-input and multiple-output applications. Antenna performance is analyzed using simulations and validated with measurements. A minimum isolation level of 25\,dB was targeted between the Tx and Rx paths. Using this isolation level, a fractional bandwidth of 0.7$\%$ was measured for the antenna with a maximum isolation of 52.3\,dB at 8.06\,GHz. Furthermore, the total efficiency of the manufactured FD antenna was estimated by comparing simulated and measured realized gains, resulting in a total efficiency of $31\%$ for the Tx and $24\%$ for the Rx. The measured performance of the FD antenna confirmed the inherent trade-offs FD antennas have, while still providing a scalable design that can serve as a building block for future communication systems.
Source: Aaltodoc (Aalto University)
Author: Pietiläinen, Eero
Institution: Aalto University
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7134680142
