Work

Mechanisms of Fouled Railway Ballast Deterioration Under Freeze–Thaw and Cyclic Loading: Implications for Sustainable Maintenance in Seasonal Frozen Regions

Year: 2026

Type: article

Abstract: Maintaining ballast performance in seasonal frozen regions is essential for resilient and sustainable railway infrastructure because freeze–thaw-driven fouling can shorten service life and increase maintenance-related material consumption. To investigate the deterioration mechanisms of fouled railway ballast in seasonal frozen regions, freeze–thaw cycle tests and cyclic loading model tests were conducted in sequence using a custom low-temperature geotechnical system. The test results processed by Origin software indicate that unfrozen water migrates toward the freezing front under temperature gradients and forms ice lenses during freezing. During thawing, meltwater is retained above the underlying frozen soil. Repeated freeze–thaw cycles therefore promote progressive water accumulation in the upper soil layers, eventually forming a clay layer with high water content. Under cyclic loading, interlayer thickening exhibited clear moisture thresholds relative to the clay liquid limit (LL = 24%). Below the LL (18–24%), ballast penetration and fines migration were limited and thickness increased slowly. Above the LL, rapid strength loss accelerated penetration and upward transport. At an initial water content of 32%, fines migration surpassed the ballast surface and the ballast became fully fouled, meaning that the fouled interlayer thickness equaled the full 100 mm ballast-layer thickness. Fouling severity increased sharply with moisture: the void contaminant index exceeded the maintenance criterion (VCI > 40%) at 28% water content and evolved into severe mud pumping at higher concentrations. Excess pore water pressure developed stratification with depth, maintaining an upward hydraulic gradient near the interface and yielding a net water loss of 2.24–6.91% in the upper fine-grained layer. These quantified thresholds and mechanistic insights provide actionable trigger points for condition-based maintenance and climate-adaptive design, helping extend track-bed service life and reduce resource-intensive ballast renewal in seasonal frozen regions.

Source: Sustainability

DOI: 10.3390/su18062808