Work

From Casting to Printing: Rheological Modification of General-Purpose RTV-2 Silicones for Material Extrusion

Year: 2026

Type: article

Abstract: This study investigates the relationship between viscosity and manufacturability of two-component silicones in extrusion-based additive manufacturing. A methodology is proposed to adapt commercially available, low-viscosity general-purpose silicones for direct 3D printing using the material extrusion system provided by Lynxter S300X. EcoFlex™ 00-50 silicone was modified through controlled additions of a thixotropic agent (THI-VEX), producing formulations with progressively increased viscosity. After a preliminary qualitative viscosity assessment, formulations were printed using identical process parameters and evaluated through a set of dedicated geometric benchmark specimens targeting critical failure modes, including unsupported thin walls, overhangs, gaps, and slender structures. Print outcomes were assessed via multi-rater visual inspection with inter-rater reliability analysis to ensure consistency. Results reveal a strong correlation between thixotropy and geometric fidelity, identifying the formulation containing 4.0 wt% THI-VEX as optimal under the tested conditions. The study provides practical design and process guidelines for silicone additive manufacturing and highlights the importance of integrated material–process optimization for reliable fabrication of soft, highly deformable materials.

Source: Applied Sciences

DOI: 10.3390/app16062764

Authors: Francesco Buonamici, Lapo Governi, Yary Volpe, Monica Carfagni, Rocco Furferi

Institution: University of Florence

Language: English

Topic: Additive Manufacturing and 3D Printing Technologies

Subfield: Automotive Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: gold

Estimated APC paid: $2,896