Year: 2026
Type: article
Abstract: This paper presents a preliminary investigation of the feasibility of using diamond in high-temperature environments. These miniaturized sensors made from materials like 3C-SiC, diamond, and graphite exploit the expansion of the crystal lattice due to neutron irradiation, which is then reduced upon heating. Measuring lattice parameters before and after heating can, in principle, allow temperature determination within a few degrees up to 1000 °C. The study focused on a diamond sensor, calculating fast neutron flux and activity in the Tehran research reactor core. Results showed a significant reduction in diamond activity after approximately 3 months. Pre- and post-irradiation analyses using X-ray fluorescence for impurities and X-ray diffraction (XRD) for phase identification and crystal characteristics were performed. A diamond sample was irradiated for 189 days in the F8 channel of the TRR core to a neutron fluence of 2 × 10 20 n/cm 2 . Post-irradiation analysis included XRD and thermal analysis in an attempt to explore a possible calibration relationship by heating raw, irradiated, and heat-treated samples at 600–800 °C for 10, 100, and 500 minutes. Within the limits of this study, the results suggest that the diamond crystal lattice shows partial recovery near the second peak of the reference diamond pattern at 700 °C. However, most heat-treated samples remained amorphous, and only a weak diffraction peak was observed at 700 °C, indicating incomplete recovery. Therefore, while annealing above 650 °C may be necessary for any detectable recrystallization, the 600–800 °C range is suggested as a candidate for further investigation. Further work with synthetic diamond, lower fluences, and complementary characterization is required before a reliable sensor can be realized.
Source: Results in Materials
Institution: Nuclear Science and Technology Research Institute
Language: English
Subfield: Radiation
Field: Physics and Astronomy
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,530
OpenAlex ID: W7135234934
