Work

Structural Optimization of a Mechanical Lime Kiln Using Multi-Physics Coupling Simulation to Improve Calcination Uniformity

Year: 2026

Type: article

Abstract: The present study deals with the problem of irregular temperature distribution, simultaneous under-firing and over-firing, and their resultant efficiency and quality problems in a mechanical lime vertical kiln powered by domestic waste flue gas. The numerical simulation and structure optimization were carried out based on a 150 kg/h pilot-scale kiln. This combined model was built on the ANSYS Fluent 2022 R1 platform with UDF and UDS, incorporating limestone decomposition kinetics to enable the solution of gas and solid energy equations separately, and simulation of complex transfer and reaction processes. To correct the separation of flows at one inlet, a symmetric four-direction (00, 900, 1800, 2700) air intake plan was suggested. The findings show that this design essentially transforms the internal flow field into uniform and symmetrical temperature and concentration distributions. The calcination region contained both gas and solid temperatures in the optimum range to produce active lime. Specifically, the optimized kiln achieved a temperature range of 1190–1450 K in the calcination zone, a decomposition rate of approximately 82.7% (compared to 5.3% in the original model), and an increase in effective CaO content from 81.7% to 87.7%, with validation errors below 15%. It was demonstrated that the model is reliable, since the outlet simulated values correlated well with the measured ones. The preheating, calcining, and cooling zones’ heights of the optimized kiln adhered to the design requirements. This research is innovative in its application of a multi-physics coupling model with a varying heat source in a kiln and, in turn, identifies the synergism improvement process in the flow, temperature, concentration, and reaction fields.

Source: Applied Sciences

DOI: 10.3390/app16062885

Authors: Jing Yang, Zhenpeng Li, Yunfan Lu, Kangchun Li, Fuchuan Huang

Institution: Guangxi University

Language: English

Topic: Heat Transfer and Numerical Methods

Subfield: Computational Mechanics

Field: Engineering

Domain: Physical Sciences

SDGs: Affordable and clean energy, Climate action

Open Access status: gold

Estimated APC paid: $2,896