Work

Depth of penetration prediction in atmospheric and submerged abrasive water jet machining of Nimonic-90 using hybrid cohort intelligence modelling

Year: 2026
Type: article
Abstract: This study investigates the influence of machining environment—atmospheric versus submerged—on the performance of Abrasive Water Jet Machining (AWJM) of Nimonic-90, focusing on depth of penetration (DOP) and surface quality. Experiments were conducted using a Taguchi L27 design considering water pressure (WP), traverse speed (TS), abrasive flow rate (AFR), and stand-off distance (SOD) as control parameters. Atmospheric machining achieved a maximum DOP of $$37.46 \pm 3.01$$ ​ mm at 275 MPa, whereas submerged machining produced smoother surfaces ( $$R_a = 1.91$$ – $$4.45\,\upmu $$ m) due to the damping effect of the surrounding water medium. TS was identified as the most influential parameter ( $$\Delta = 6.36$$ ), with an increase from 50 to 150 mm/min reducing DOP by approximately 54.6%. The optimal parameter combination for maximum DOP was WP = 275 MPa, TS = 50 mm/min, AFR = 300 g/min, and SOD = 2 mm. The Hybrid Cohort Intelligence (HCI) model incorporating polynomial regression demonstrated strong predictive capability, achieving $$R^{2} = 0.9812$$ and MSE = 1.106 for AWJM, and $$R^{2} = 0.9900$$ and MSE = 0.520 for Submerged Abrasive Water Jet Machining (SAWJM). Overall, atmospheric AWJM is suitable for higher material removal, while SAWJM provides superior surface integrity, offering a useful framework for process optimisation of Nimonic-90 within the investigated parameter range.
Language: English
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7140039830
FWCI:
Cites: 69
Cited by:
Related to: 10