Work

Investigation on Flowback Efficiency and Permeability Damage Characteristics in Coal Reservoirs: A Case Study of the Midong Block, Xinjiang

Year: 2026

Type: article

Abstract: The Midong Block is currently a primary target for coalbed methane (CBM) exploration and development in Xinjiang. However, fracturing operations in this region generally exhibit low flowback rates, which escalate the risk of reservoir damage and ultimately suppress daily gas production. To elucidate the impact of various geological and engineering factors on flowback efficiency and permeability damage, as well as their underlying mechanisms, this study conducted fracturing fluid flowback simulation experiments. The pulse-decay permeability measurement and weighing methods were employed to quantify the variations in flowback rates and permeability damage intensities under different conditions. Experimental results indicated that the permeability damage rate in the Xishanyao Formation coal samples ranged from 3.12% to 92.86% after flowback, with 92% of the samples exhibiting a flowback rate of less than 10%. This significant impairment was primarily attributed to the synergistic effects of stress-induced fracture closure, clay mineral hydration swelling, and coal fines migration. Specifically, elevated confining pressures and prolonged soaking times exacerbated reservoir damage. A low flowback pressure differential intensified the water locking effect, hindering fluid recovery. Notably, the flowback velocity displayed a U-shaped velocity sensitivity profile. In the low-temperature regime, damage characteristics fluctuated, controlled by competitive thermal–hydro–mechanical (THM) coupling mechanisms.

Source: Processes

DOI: 10.3390/pr14061010