Work

PBF-LB/M of Inconel X-750: Correlation between crystallographic features, microstructural evolution, and processing parameters

Year: 2026

Type: article

Abstract: Processing polycrystalline Ni-base superalloys with powder bed fusion using a laser beam (PBF-LB/M) is highly relevant for the transport and energy sectors. Inconel alloys 718, 625, and 939 have been the focus of most research efforts, however, these alloys differ from Inconel X-750. Three aspects were approached in the current work: processability, statistical correlations, and a detailed description of the resulting microstructure. FE-SEM-EBSD, STEM-EDS, and APT were used in addition to the usual methods for additive manufacturing parts. The role of dislocations in the precipitation of primary γ ′ for was found as secondary for this alloy, while the local chemical composition is the likely leading factor. Such is the case that no correlation between the geometrically necessary dislocations (GND) and other quantities. Evidence was found regarding the impact of grain boundary misorientation on the precipitation of η -phase. The effect of the precipitation of the η -phase on primary and secondary γ ′ precipitates is described, as a difference in the chemical composition of both γ ′ precipitates was detected. Lastly, the quantification of the γ , γ ′ and η -phases for AM Inconel X-750, performed through image analysis and H-XRD, is reported here for the first time.

Source: Journal of Alloys and Compounds

DOI: 10.1016/j.jallcom.2026.187519