Get started
Work

Modelling the Effect of Vertical Alternating Current Electric Field on the Evaporation of Sessile Droplets

Year: 2026
Type: article
Abstract: We developed an arbitrary Lagrangian–Eulerian (ALE)-based multiphysics model for evaporation from a contact-line-pinned sessile drop of neat water subject to a vertically oriented sinusoidal alternating current (AC) electric field applied across parallel-plate electrodes. The framework fully couples electrostatics, incompressible flow, heat transfer with evaporative cooling, and transient vapour transport in air, and includes an instantaneous, voltage-controlled electrowetting contact-angle response under constant-contact-radius conditions. Validation against published data shows that the model captures both pinned-droplet evaporation and electrically induced deformation. Because Maxwell traction scales with the squared electric-field magnitude, droplet height and contact angle exhibit a robust 2:1 frequency-doubled response, producing two peak–trough events per voltage period. The resulting periodic deformation drives oscillatory interfacial shear and internal recirculation, yielding a synchronous double-peaked evaporative-flux waveform. Gas-side analysis quantifies a time-varying diffusion-layer thickness via a characteristic diffusion length; two thinning events per period coincide with flux maxima, indicating that AC enhancement is dominated by periodic compression of the vapour boundary layer and reduced gas-side mass-transfer resistance. Increasing voltage amplitude (0–60 kV) strongly accelerates volume loss, while frequency has a secondary effect: the cycle-averaged flux rises from 1 to 10 Hz but decreases slightly at 20 Hz due to phase lag and weaker boundary-layer modulation.
Source: Processes
DOI: 10.3390/pr14071066
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7141224065
FWCI:
Cites:
Cited by:
Related to: