Concurrent optimization of fracture toughness, thermal conductivity, and tribological behavior in Cf/Si3N4 composites via phase driven selection
Year: 2026
Type: article
Abstract: Carbon fiber–reinforced silicon nitride (C f /Si 3 N 4 ) composites were fabricated by spark plasma sintering (SPS) using α-, β-, and γ-Si 3 N 4 powders to clarify the influence of the initial Si 3 N 4 phase on microstructural evolution and functional properties. The results show that the starting phase significantly affects densification behavior, phase transformation, and mechanical and tribological performance. The composite derived from α-Si 3 N 4 achieved the highest relative density (96.53%) and exhibited an optimal balance of fracture toughness (10.87 MPa m 0.5 ), thermal conductivity (66 W/m K), and stable friction behavior (COF ≈ 0.46). This performance is attributed to the in-situ formation of a self-reinforced β-Si 3 N 4 microstructure during the α → β phase transformation, which promotes crack deflection, crack bridging, and effective load transfer in synergy with carbon fibers. In contrast, β- and γ-Si 3 N 4 –based composites showed lower densification or excessive hardness associated with increased porosity and secondary phase formation. These findings demonstrate that controlling the initial Si 3 N 4 phase provides an effective microstructural design strategy for developing high-performance C f /Si 3 N 4 composites for thermostructural applications such as aerospace brake discs.
Source: Scientific Reports
Institution: Malek Ashtar University of Technology
Language: English
Subfield: Ceramics and Composites
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7142049475