Work

Measurement Method for Mold Slag Thickness in Continuous Casting Mold Using Millimeter-Wave Radar and Eddy Current Sensors

Year: 2026

Type: article

Abstract: To address the existing challenges in mold slag thickness measurement—such as the susceptibility of contact sensors to high-temperature degradation and the limitation of non-contact methods to detecting only the upper slag surface—this study proposes an integrated approach that fuses millimeter-wave radar and eddy current sensors for measuring mold slag thickness in a continuous casting mold. The method innovatively combines two sensing principles: the millimeter-wave radar employs an improved FFT-CZT2 high-precision ranging algorithm to perform high-resolution scanning of the solid slag upper surface, reconstructing its topography (error: ±1 mm), while Mel-frequency cepstral coefficients (MFCC) are applied to extract features from the radar intermediate-frequency signals, combined with an enhanced PSO-BP neural network algorithm to predict the thickness of the solid slag layer (error: ±5 mm). Concurrently, an eddy current sensor monitors the liquid slag–molten steel interface position (error: ±1 mm). Through dual-sensor data fusion, the upper surface topography data and solid slag thickness obtained from the radar are spatially registered in three dimensions with the molten steel level information derived from the eddy current sensor. This integration ultimately enables the non-contact synchronous measurement of three key parameters within the mold: solid slag layer thickness, liquid slag layer thickness inversion, and molten steel level. Furthermore, by reconstructing the upper slag surface morphology, the method successfully resolves practical issues such as uneven material distribution, local material deficiency, or excessive feeding. Preliminary experimental verification confirms that the proposed method maintains stable performance even under high-temperature and complex environmental conditions. It thus provides a real-time, accurate, and full-cross-section monitoring solution for mold slag in continuous casting, offering significant practical value for the development of smart steel plants.

Source: Sensors

DOI: 10.3390/s26072141

Authors: Yi An, Zhichun Wang, Junsheng Xiao

Institution: Inner Mongolia University of Science and Technology

Language: English

Topic: Metallurgical Processes and Thermodynamics

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $3,137

Funder: Natural Science Foundation of Inner Mongolia