Work

Användningen av lignin i trä-polymer kompositer

Year: 2021
Type: dissertation
Abstract: In the world we live today, there is a huge need for more sustainable materials. A material type which could be tailored into a more sustainable material is wood polymer composites. This could be possible by changing the raw material used for them from virgin and unsustainable materials to recycled and residual materials. The aim of this work was to explore and understand the effect of residual unmodified kraft lignin and colloidal lignin particles on the mechanical and interfacial properties of wood polymer composites made out of recycled polypropylene and residual milled wood. The work was started by developing a suitable composite preparation method, after which the raw materials and composites were characterized and tested. From the raw materials, the size of the colloidal lignin particles was characterized, and the virgin and recycled polypropylenes were compared and analysed by FTIR. The compatibility and dispersion of the materials in the composites were analysed by SEM images. The composites were also mechanically tested by measuring their tensile properties and impact strength. Furthermore, the sunlight resistance of the composites was tested by a sunlight simulation. The results for the material characterizations showed that the average colloidal lignin particle size was ca 120 nm, and that there were no significant differences in the FTIR spectral bands of virgin and recycled polypropylene except for one expected band in the recycled polypropylene which was assumed to be due to additives commonly found in recycled polypropene. The SEM images showed that the compatibility between the hydrophobic polypropylene and hydrophilic milled wood was quite poor, and that there were no large differences between the different composites. The addition of lignin or colloidal lignin particles did thus not improve the compatibility between the components or the dispersibility of milled wood in the polymer matrix, but neither did the addition of lignin or colloidal lignin particles worsen these properties. Lignin and colloidal lignin particles could thus be used as cheap and environmentally friendly fillers in composites. The results for the mechanical properties also supported this as the lignin and colloidal lignin particles did not generally increase the mechanical properties, but proved to be a quite equally good filler as the milled wood, and even a bit better for some properties. The most fascinating results were however achieved from the sunlight simulation results, which proved that milled wood, lignin and colloidal lignin particles can protect the composite from a decrease in the mechanical properties, and possibly even increase the tensile properties of the composite when it has been exposed to sunlight. Thus, a composite like the ones developed in this work with recycled and residual materials could be suitable for outdoor applications. More research on how to improve the compatibility between the components is however needed in order to improve the mechanical properties of the composite.
Institution: Aalto University
Language: English
Open Access status: green
OpenAlex ID: W7145204568
Cites: 62
Cited by:
Related to: 9