Work

実機スケールにおける自己誘起磁場型mpdスラスタの性能特性と陰極現象

Year: 2021
Type: dissertation
Abstract: The area of space exploration has been expanding to the deep space beyond the Earth orbit with the progress the space development.The high-power electric propulsion is one of the candidates to achieve those missions because of their high ΔV and high specific impulse.Magnetoplasmadynamic (MPD) thruster is a promising candidate for high-power electric propulsion, which enables deep-space missions such as a manned Mars exploration because the thruster can simultaneously attain high specific impulse and thrust density compared with other electric propulsion devices such as ion engine and Hall thrusters.In particular, the self-field type MPD thrusters have major benefits of the simple structure and high thrust-to-mass ratio.Although many experimental, numerical, and theoretical studies have been conducted for the MPD thruster since the 1960s, the thruster has not been utilized for the actual mission yet because of the lack of the design guideline for actual devices, which has both high enough thruster performance and thermal durability.Our research group proposed that the large-scaled (actual devise scaled) electrode thruster, which is called MK-2 thruster, compared with many previous studies can be possible to satisfy both high enough thruster performance and thermal durability by numerical simulation.The ultimate goal of this research is to establish the design guideline of an MPD thruster for the actual mission.With this goal in mind, we will attempt to reach the following three research objectives:(1) To characterized and clarify the thruster performance of the MK-2 thruster.(2) To obtain guidelines for reducing the concentration of discharge to the anode edge which causes the high temperature in MK-2 thruster.(3) To clarify the cathode surface temperature in MK-2 thruster operation.This thesis consists of eight chapters.In chapter 1, we review the fundamental physical background of MPD thrusters and previous studies and indicate the statement of the problem and the objectives of v this study.Chapter 2 introduces the numerical simulation code.The numerical modeling and method are described.This numerical simulation is considered the physical model incorporating the real gas effect.Therefore, the physical model is also detailed explained in this chapter.Chapter 3 describes the experimental setup and facilities.The theoretical and designing background is indicated in this chapter.In chapter 4 describes the characterization of the MK-2 thruster performance and the effect of electrode geometry on the hydrogen MPD thruster performance using numerical simulation.From the numerical results, it is clarified that the anode nozzle diverging angle is strongly affected by the thruster performance.The Hall parameter and ion-slip parameter at the vicinity of the anode wall is strongly increasing with an increase in the discharge current and anode nozzle diverging angle.The larger ion-slip led to the deceleration of the neutral particles, and which resulted in the limited amount of the gas dynamically thrust.Regarding the input power, about 50% of the electric power is consumed owing to the ion-slip heating in a larger discharge current.The plasma heating at the supersonic region is not converted to the thrust.Chapter 5 discuss the relationship between thruster performance and plasma structure and clarify the structure which is the concentration of the discharge to anode edge in MK-2 thruster.The thrust performance is measured using the pendulum type thrust stand, and the plasma parameters and magnetic field are measured with the double Langmuir probes and magnetic probes.Regarding the plasma parameters and magnetic field, we obtain the r-z surface area in the discharge chamber.As a result, in the case of a flared anode, we can obtain the thrust efficiency and specific impulse characteristics, which similar to the conventional small-scaled thrusters.Regarding the discharge concentration at the anode edge, it was experimentally clarified that MK-2 thruster can be relaxed the discharge current concentration on the anode edge.The discharge current was attached downstream of the flared anode due to the high electron Hall parameter, which is exceeding 1, in the case of the flared anode case.On the other hand, it was uniformly distributed on the anode wall in the case of a straight anode.Chapter 6 describes the cathode surface temperature distribution in MK-2 thruster and the vi relationship between cathode phenomena and plasmas in MK-2 thruster.Regarding the cathode phenomena, we discuss the current density distribution on the cathode surface calculated from measured cathode surface temperature distribution.The two-dimensional image of cathode surface temperature distribution is first measured by using newly developed two-color thermography under the condition of arc discharge.As a result, it is clarified that the cathode surface temperature dip from cathode material melting temperature under thruster operation in all operating conditions.Besides, it is clarified that the current density distribution on the cathode surface reveals a correlation with plasmas current density distribution, and we clarify the thermionic electron emission area on the cathode surface depends on the thruster geometry and propellant species.Regarding the propellant species, the thermionic electrons are emitted from a narrow area of the cathode tip in the case of hydrogen as a propellant, on the other hand, the thermionic electrons are emitted from the entire cathode surface in the case of argon as a propellant.These results suggest that the effective anode-tocathode radius ratio varies greatly depending on the operation condition, and the cathode temperature can be decreased when using the straight anode in the MK-2 thruster.Chapter 7 indicates the integrated discussion about the results in Chapter 4-6 was conducted.Besides, we proposed the design guideline of the MK-2 thruster Finally, Chapter 8 summarizes the conclusions, significant findings, and proposes the design guideline for the MK-2 thruster for the actual mission.The recommended design of the discharge chamber geometry for MK-2 thruster using hydrogen as a propellant should be made the anode electrode having sufficiently small nozzle diverging angle to reduce the electric power consumption, which does not contribute to the thrust, and to increase the axial Lorentz force.Besides, the propellant should be supplied from the anode wall simultaneously with the propellant supplying from the backplate to reduce the plasma depletion at the vicinity of the anode surface.
Language: Japanese
Open Access status: green
OpenAlex ID: W7145827285
Cites: 63
Cited by:
Related to: 10