Year: 2023
Type: dissertation
Abstract: This paper discusses common mode (CM) noise reduction methods in non-isolated DC-DC converters.Recently, the demand for switched-mode power supplies (SMPSs) has been increasing because of increasing power generation in renewable energy generations and power consumption in electrified transportation and data centers.Especially in SMPSs, non-isolated DC-DC converters are employed in various applications.But, on the other hand, the electromagnetic noise emitting from SMPSs becomes problematic.SMPSs are demanded to have high power density.Therefore, the operation frequency of SMPSs is increasing to achieve higher power density.Wide band gap (WBG) devices utilizing silicon carbide and gallium nitride are employed in SMPSs for high-frequency operation because of the high dv/dt and di/dt ratio.However, the high-frequency operation and the high dv/dt and di/dt ratio increase electromagnetic noise.Especially, Common mode (CM) noise that flows through the ground is difficult to suppress.Therefore, many studies have been made on CM noise reduction methods.Thus, the purpose of this paper is to propose CM noise reduction methods in non-isolated DC-DC converters for high-power density.First, CHAPTER 1 explains the social background of increasing demand for SMPSs and the background of CM noise in SMPSs.The purpose of the dissertation and the research subject area are also explained at the end of CHAPTER 1.CHAPTER 2 explains the technical background of noise evaluation in SMPSs.Then, three CM noise reduction methods are proposed in CHAPTER 3, 4, and 5.The summaries of the chapters are described below.In CHAPTER 3, the CM noise reduction method with an auxiliary winding is proposed for a multiphase interleaved DC-DC converter with a coupled inductor.The proposed method
Authors: 佐々木, 守, Sasaki, Mamoru
Institution: Nagoya University
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7146040246
