Year: 2026
Type: article
Abstract: We report highly sensitive NO2 gas sensors based on ZnO thin films prepared via a sol–gel method and deposited onto nanostructured black silicon (b-Si). The b-Si layers, fabricated using maskless reactive ion etching, consist of densely packed silicon nanoneedles with an average height of ~810 nm, a base diameter of ~160 nm, and a characteristic periodicity of ~190 nm. Owing to this highly developed surface morphology, the effective surface area of the b-Si layer is estimated to be approximately one order of magnitude higher than that of planar silicon, thereby enhancing gas adsorption and charge-transfer processes in the ZnO film. ZnO/b-Si/Si sensors exhibit a response of 448% at 25 ppm NO2 at an optimal operating temperature of 200 °C, which is approximately 1.5 times higher than that of planar ZnO/Si sensors at the same concentration and temperature. Notably, a comparable response (~300%) is achieved at a reduced temperature of 140 °C, indicating the potential for low-power operation. The sensing mechanism is governed primarily by the ZnO layer, while b-Si serves as a morphological scaffold, increasing the effective surface area. These results demonstrate that ZnO-coated b-Si nanostructures represent a promising platform for high-performance NO2 sensing and offer strong potential for integration with silicon-based microelectronic technologies.
Source: Nanomaterials
DOI: 10.3390/nano16070427
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
Funder: State Committee of Science
Award: G1703919850
OpenAlex ID: W7147345591