Work

Atık su arıtma çamurunun yüksek sıcaklık pirolizi: Çeltik sapı ve kompozit plastik atıklar ile birlikte pirolizin sinerjik etkileri

Year: 2025
Type: dissertation
Abstract: Rapid industrialization and urbanization have led to the continuous generation of large amounts of sewage sludge, which in turn poses significant environmental problems and presents major challenges for resource recovery. As global wastewater treatment capacities expand with population growth, the annual production of sewage sludge is expected to rise consistently, placing additional pressures on existing waste management infrastructures and necessitating more sustainable treatment strategies. Municipal sewage sludge is rich in organic components, nutrients, and contaminants such as micropollutants, pathogens, and heavy metals. The complex and heterogeneous nature of sewage sludge makes its stabilization and safe disposal increasingly difficult, especially considering emerging contaminants such as pharmaceuticals, endocrine-disrupting compounds, and antibiotic-resistant genes, which are now recognized as major environmental threats. Dumping at sea, landfilling, and incineration are unsustainable practices that pose environmental risks and are not economically viable. In many regions, strict environmental regulations, limited land availability, and rising disposal costs have accelerated the search for alternative valorization routes. In contrast, thermochemical conversion processes are identified as promising means for sustainable sludge treatment, especially pyrolysis. Pyrolysis is a process that can thermochemically decompose organic waste in an oxygen-depleted environment and generate syngas, bio-oil and biochar, bringing potential profits from renewable energy and material recovery. Compared with other thermochemical options such as gasification or hydrothermal liquefaction, pyrolysis is particularly advantageous due to its operational flexibility, lower emissions, and ability to handle wide variations in feedstock composition. However, sewage sludge pyrolysis alone is faced with problems such as high ash content, low energy efficiency, and poor product yields. Co-pyrolysis, which involves thermally treating sewage sludge alongside other wastes, has garnered attention as a solution to these limitations. By blending sludge with biomass or plastic waste streams, co-pyrolysis has been shown to enhance devolatilization behavior, improve calorific value, and promote desirable secondary reactions that would otherwise be limited in single-feed pyrolysis. In this study, the synergistic effect of co-pyrolysis for the mixtures of sewage sludge (SS), rice straw (RS) and composite plastic wastes (PE&PP) has been investigated with the aim of high gas yields and hydrogen generation. These feedstocks were selected to represent three major global waste categories; municipal, agricultural, and plastic with the intention of developing an integrated valorization approach that can address multiple waste challenges simultaneously. In this context, the applicability of high-temperature pyrolysis technology was uniquely explored at both a rotary-type batch reactor and a rotating screw-type pilot-scale continuous reactor operating under the industrially relevant conditions to assess real-world applicability and scalability. Using two distinct reactor designs allowed for a comprehensive comparison between laboratory-scale controlled conditions and continuous industrial processing behavior, providing insights into mass transfer limitations, heat distribution, and operational stability. Experiments were conducted at 850°C to determine optimum mixture ratios for maximizing hydrogen and gas production while evaluating synergetic effects among the feedstocks. High-temperature operation was particularly emphasized in order to intensify cracking reactions, promote radical formation, and enhance the decomposition of long-chain hydrocarbons originating from plastics. In the experiments, gas yields were improved by increasing the operating temperatures up to 850°C. This temperature range was found to accelerate the breakdown of refractory organic matter in sewage sludge and facilitate deeper secondary reactions, leading to more efficient conversion of condensable vapors into permanent gases. The results demonstrated that co-pyrolysis of SS, RS, and PP significantly improved gas yields and altered product distribution due to synergistic interactions between feedstocks compared to sewage sludge pyrolysis alone. Such synergistic behavior was evident in the suppression of char formation, enhanced release of volatiles, and increased free radical availability, all of which contributed to the formation of lighter and more energy-dense gases. While the pyrolysis of sewage sludge and rice straw favored CO and CO₂ formation due to the high oxygen contents of these feedstocks, more methane and light olefins were produced when the plastics were added to the feedstock blends. This shift in gas composition reflects the complementary decomposition pathways of biomass and plastics, where oxygenated species facilitate hydrogen abstraction reactions, while plastics supply long-chain hydrocarbons that readily undergo cracking. This was ascribed to the initially generated radicals from the decomposition of sewage sludge and/or rice straw that might promote the scission reactions of plastics towards volatiles. Particularly, ternary mixtures of sewage sludge, rice straw, and plastics—SSPPRS (50% SS, 25% RS, 25% PP)—produced 78.85% of gas yield with its H₂ portion of 31.04% with the continuous reactor, surpassing batch system results. This outstanding performance underscores the importance of feedstock balancing, where the optimal ratio provides sufficient hydrogen donors, cracking precursors, and oxygenated compounds to sustain active radical pathways. Secondary reactions such as steam de-alkylation, steam cracking, water gas shift and so on were regarded as being responsible for the high gas yields when the primary products of pyrolysis, i.e., condensable vapors, were much exposed to the hot zones inside the reactor. The extended vapor residence time in the continuous system, combined with its internal thermal cracking zone, further promoted the decomposition of tars and heavy hydrocarbons, resulting in cleaner gas streams and reduced condensable fractions. The dehydration of organic components involving the loss of water may supply steam to create a reactive pyrolysis atmosphere. The high H₂ and CH₄ concentration in plastic-rich blends generated high heating value syngas, which was more than 22 MJ/Nm³ in some cases. Co-pyrolysis also enhanced the quality of biochar; RS-rich blend-derived biochar had better carbon and fixed carbon yield, while plastic-rich blends generated structurally stable chars with application potential in materials. These variations highlight the tunability of char characteristics depending on feedstock composition, offering pathways for customized char-based products such as adsorbents, soil amendments, or reinforcing fillers. Additionally, FTIR and XRF determination confirmed the structural transformations of biochars and mineralization as an indication of the applicability of the solid residues as a soil amendment or environmental remediation. The observed changes in functional groups, inorganic phases, and mineral crystallinity further support the potential reuse of these chars in environmental technologies, contributing to waste minimization and circular material flows. GC-MS analysis demonstrated that continuous pyrolysis favored the yield of nitrogenous and aromatic compounds, while batch pyrolysis produced more oxygenates, aliphatics, and phenolics. These compositional distinctions reveal the influence of reactor hydrodynamics on vapor-phase reactions, suggesting that continuous systems better facilitate aromatization and deoxygenation pathways. In this study, the continuous pyrolysis system proved to be superior to batch reactors in terms of gas yield, energy efficiency, process stability and product consistency. The screw-driven mechanism enabled uniform heating, improved mixing, and reduced operational fluctuations, all of which are essential for large-scale deployment. Energy recovery in the form of syngas was up to 80% in continuous operation, and the experimental error margins were found to be lower. Secondary reactions were also favored with increased residence time and with the combined thermal cracking unit of the continuous reactor, yielding more hydrogen and improving gas quality. This highlights the fundamental importance of reactor design in thermochemical conversion processes, particularly when aiming for hydrogen-rich gas production. Furthermore, economic analyses suggest that waste-to-hydrogen pathways are cost-competitive, achieving €2.2–3.5 per kg H₂ when carbon credits are included, in line with future renewable-hydrogen projections. In conclusion, the study showed that high-temperature pyrolysis can be used for different types of wastes like sewage sludge, rice straw, and waste plastics, and it proves that co-pyrolysis is an effective way to turn waste into hydrogen, which offers environmental and economic benefits and supports circular economy goals. The integration of these waste streams into a single thermochemical platform demonstrates a practical strategy for achieving multi-waste valorization, reducing environmental burdens, and producing renewable energy carriers. Conversion of wastes to hydrogen in an integrated thermochemical conversion process fosters the circular economy by putting the disposal costs down and creates a new route for generation of renewable hydrogen and value-added by-products that can be sustainably produced. The comparison between batch and continuous systems underscores the necessity of process scale-up for industrial applications, with continuous pyrolysis offering superior efficiency and product quality. Overall, this work contributes a comprehensive assessment of high-temperature co-pyrolysis and establishes a robust framework for advancing waste-to-hydrogen technologies toward commercial deployment.
Language: English
Subfield: Fuel Technology
Field: Energy
Open Access status: green
OpenAlex ID: W7148212238
Cites: 360
Cited by:
Related to: 10