Work

Reassessing surface liberation for flotation: The dimensional contrast between 3D XCT and 2D SEM-based MLA

Year: 2026
Type: article
Abstract: Mineral liberation for flotation is strongly linked to particle surface accessibility, yet it is conventionally quantified using 2D polished-section descriptors from SEM-based automated mineralogy systems, including Mineral Liberation Analysis (MLA). Here, we explicitly contrast the volumetric resolving capability of X-ray computed tomography (XCT) with the intrinsic 2D nature of SEM–EDS-based automated mineralogy to reassess liberation in flotation of coarse and composite sulphide particles. A bornite-rich ore was separated into two coarse fractions (–300 + 212 µm and –212 + 150 µm) and floated in a Hallimond tube. Feed and products were characterised by both MLA and XCT. While MLA provided 2D polished-section descriptors, including areal sulphide composition and perimeter-based exposure, XCT reconstructed full particle volumes and quantified the 3D surface exposure of the grouped valuable sulphide phase, which is a physically direct descriptor of the sulphide surface available for bubble–particle attachment. The MLA- and XCT-derived descriptors produced different class distributions, particularly for coarse composite particles in the low-to-intermediate liberation/exposure range, while becoming more similar toward the high-liberation/exposure range. When the 20-min XCT class mass recoveries were normalised to the recovery of the 100% surface-exposure class, both size fractions showed an onset of stronger exposure-dependent recovery at approximately 25% surface exposure. The fitted transition midpoint shifted from 40% surface exposure for the –212 + 150 µm fraction to 55% for the –300 + 212 µm fraction, corresponding to an approximately 15 percentage-point shift toward greater surface exposure for the coarser particles.
Language: English
Open Access status: hybrid
Estimated APC paid: $4,220
OpenAlex ID: W7150886282
FWCI:
Cites: 46
Cited by:
Related to: 10