Influence of Feed per Tooth and Material Structure on Surface Roughness in CNC Edge Milling of Alternative Lignocellulosic Materials
Year: 2026
Type: article
Abstract: Surface quality of machined wood-based panels plays a key role in subsequent processing and product performance; however, its formation during CNC edge milling remains insufficiently understood, particularly for materials with different structural characteristics, including recycled content. This study investigates the influence of feed per tooth, milling strategy, and material structure on surface quality during CNC edge milling of particleboards manufactured from alternative lignocellulosic resources. Six board variants were experimentally produced and machined on a five-axis CNC machining center Morbidelli m100 using a single-edge milling cutter, with feed per tooth varied at three levels and both climb and conventional milling strategies applied. Surface quality was evaluated using a non-contact 3D optical profilometer Keyence VR-6000, and roughness (Ra) and waviness (Wz) parameters were analyzed. The results showed that surface roughness increased with increasing feed per tooth for all materials, with an increase of approximately 30%–70%. Statistical analysis confirmed a significant effect of feed per tooth and material type, while milling strategy and its interaction with material were not statistically significant. Materials with higher surface heterogeneity (CVRa) showed increased roughness and greater sensitivity to feed. A statistically significant positive relationship was found between surface heterogeneity (CVRa) and roughness sensitivity (ΔRa), indicating that materials with higher surface heterogeneity (CVRa), which likely reflects variability in their internal structure, are more sensitive to changes in feed per tooth.
Source: Forests
DOI: 10.3390/f17040512
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7154991606