Work

Numerical Optimization of Thermal Management of LiFePO4 Battery with Droplet-Shaped Turbulators and Nanofluid Cooling

Year: 2026

Type: article

Abstract: Efficient thermal management of lithium-ion batteries is critical for the safety, performance, and longevity of electric vehicles. This work numerically investigates a battery thermal management system (BTMS) for a LiFePO4 battery, featuring a liquid-cooling plate with novel droplet-shaped turbulators and coolant with different nanofluids. Computational Fluid Dynamics (CFD) simulations were employed to analyze the effects of cooling channel geometry, nanofluid type, nanoparticle volume fraction, coolant inlet velocity, and battery discharge rate on the system’s thermal performance and pressure drop. Results show that the droplet-shaped channel reduces the maximum battery temperature by 1.64 K compared to a conventional straight channel, owing to enhanced turbulence and larger heat-transfer area. Among different coolants, the 6% Cu–water nanofluid demonstrated the highest cooling effectiveness due to its superior thermal conductivity. To balance competing objectives, a multi-objective optimization using Response Surface Methodology (RSM) and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) was performed. The optimal design was achieved with a coolant velocity of 0.097 m/s and a volume fraction of Cu nanoparticle of 3.85%, which maintained the maximum battery temperature of 299.7 K with a minimal pressure drop of 26.27 Pa at a 1.03 C discharge rate. These findings highlight that a BTMS combining droplet-shaped turbulators with a Cu–water nanofluid provides a highly effective and energy-efficient thermal management strategy.

Source: Energies

DOI: 10.3390/en19092014