A Low-Order Thermodynamic Chamber Model for Multiphase Compressible Flow in a Profiled-Rotor Rotary Compressor
Year: 2026
Type: article
Abstract: This study presents a combined numerical and experimental investigation of transient multiphase compressible flow inside a profiled-rotor rotary volumetric compressor. While most existing studies rely on high-fidelity CFD approaches, a low-order thermodynamic chamber-based model implemented in MATLAB Release 2023a is proposed to predict the temporal evolution of pressure, temperature, and vapor volume fraction during the compression cycle. The model is based on mass and energy conservation applied to variable-volume control chambers and incorporates a simplified cavitation criterion derived from local pressure relative to saturation vapor pressure. An open-loop experimental test bench was developed to measure air mass flow rate, suction and discharge pressures, temperatures, torque, and shaft power under controlled operating conditions. These measurements are used to validate the numerical predictions. The results show good agreement between measured and simulated pressure levels and global performance indicators, with deviations quantified using mean absolute percentage error values remaining below 5% over the investigated operating range. The numerical analysis further reveals the occurrence of localized low-pressure zones during the suction phase, indicating incipient cavitation or microbubble formation at specific rotor positions. The proposed modeling approach provides a computationally efficient alternative to full CFD simulations and enables rapid parametric analysis of rotor geometry and operating conditions. The cavitation formulation does not aim to resolve detailed bubble dynamics or erosion mechanisms, but rather to identify cavitation tendency based on thermodynamic pressure thresholds.
Source: Thermo
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,207
OpenAlex ID: W7157107951