Stability Evaluation of Vegetation-Covered Highway Slopes Employing Integrated CR-InSAR and Finite Element Simulation
Year: 2026
Type: article
Abstract: Highway slopes susceptible to landslides are typically reinforced by vegetation cover and the application of concrete frame beams, but vegetation cover may degrade the accuracy of InSAR deformation monitoring. We installed artificial corner reflectors (CRs) on the frame beams and assessed the stability of the vegetated slope using finite element simulation constrained by InSAR deformation data. A study was conducted on a typical landslide-risk slope within the K87 + 391.5–K87 + 565 section of the Guihuang highway, which is reinforced with cast-in-place and prefabricated concrete beams. Experimental results demonstrate that two adjacent corner reflectors (CRs) on the two types of frame beams of the slope can be successfully identified, with deformation rates ranging from 0.1 to 0.4 mm/y, and the root mean square error (RMSE) of discrepancies between CR-InSAR measurements and slope displacement monitoring sensors is less than 0.3 mm. Meanwhile, the current strength reduction factor values for slopes reinforced with cast-in-place and prefabricated concrete beams, as constrained by InSAR multi-dimensional deformation, are 0.11 and 0.12, respectively which are much lower than the critical strength reduction factors of 1.28 and 1.22 corresponding to full coalescence of plastic strain from the slope toe to the slope crest, which indicates that the cast-in-place and prefabricated frame beams exhibit comparable support performance.
Source: Remote Sensing
DOI: 10.3390/rs18091350
Institution: Changsha University of Science and Technology
Language: English
Subfield: Aerospace Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,258
OpenAlex ID: W7157227199