Work

Quantitative strengthening and corrosion correlation for partial and full substitution of nickel by nitrogen on AISI 316 stainless steel via VIM

Year: 2026
Type: article
Abstract: Nickel stabilization of the austenitic phase in stainless steels faces economic and supply-chain pressures, motivating partial or near-complete nickel substitution through nitrogen alloying as an alternative alloy-design strategy. This study systematically evaluates partial (0.24 N, 6.56 wt% Ni retained) and near-complete (0.52 N, 0.01 wt% Ni) nitrogen substitution in AISI 316 stainless steel, produced via vacuum induction furnace (VIM) under controlled-nitrogen-pressure melting at 18 and 32 bar, respectively. Nitrogen addition refined austenite grain size by 53.4% (from 29 to 13.5 μm) and increased dislocation density from 0.13 × 10 14 to 1.97 × 10 14 m −2 , with the 0.52N alloy developing a duplex (γ + α) microstructure. A phase-resolved strengthening model decomposed yield strength contributions into grain refinement, solid-solution, and dislocation mechanisms, achieving good agreement with experimental results. Nitrogen shifted corrosion potential positively, reduced corrosion current density from 9.1 to 2.4 µA cm −2 , and EIS analysis showed the passive film’s charge-transfer resistance rising from 121.5 to 193.5 kΩ cm 2 with a corresponding fall in effective capacitance, while the electrical-equivalent film thickness recalculated from these parameters increases only modestly, from 0.10 to 0.12 nm. Dilatometry revealed a thermal instability window (780–840 °C) unique to the 0.52N alloy, consistent with thermally activated phase evolution within its γ + α duplex microstructure. The 0.24N alloy provides the most balanced combination of strength, ductility, corrosion resistance, and thermal stability among the investigated conditions, while the 0.52N alloy provides the highest strength but also exhibits greater phase complexity and a thermal-instability window; therefore, both alloys require application-specific validation of processing, weldability/forming behaviour, and long-term service performance before industrial deployment.
Language: English
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7160494002
FWCI:
Cites: 66
Cited by:
Related to: 10