Work

Nanostructured Adsorbents for Selective Lithium Recovery: Mechanisms, Fabrication, Performance Evaluation, and Applications in Desalination

Year: 2026
Type: dissertation
Abstract: The growing demand for lithium in energy storage systems necessitates the development of selective and scalable extraction technologies, particularly from complex saline water resources. This dissertation systematically investigates nanostructured Lithium/Aluminum-layered double hydroxide (Li/Al-LDH)–based adsorbents through mechanistic modulation, structural engineering, and process integration to enhance lithium recovery performance. Poly(acrylic acid)-modified LDH (PAA@LDH) was first developed to regulate surface electronic density and interfacial charge distribution. Under optimized conditions (2.5 wt% PAA, 333 K), the lithium adsorption capacity increased from 2.08 mg/g to 3.41 mg/g in low-concentration produced water, with rapid equilibrium achieved within 40 min. Density functional theory (DFT) calculations revealed enhanced electron cloud density and reduced equipotential charge, confirming a charge-transfer-driven adsorption mechanism. To overcome diffusion limitations of powder adsorbents, electrospun lithium porous nanosorbent fibers (Li-PNFs) were fabricated by embedding LDH into a polyacrylonitrile matrix. The optimized fibers exhibited a uniform diameter of approximately 546 nm, tensile strength of 2.48 MPa, and yield stress of 0.09 MPa, ensuring mechanical robustness. The hierarchical porous structure enabled a significantly enhanced static lithium adsorption capacity of 13.45 mg/g, reaching equilibrium within 60 min. DFT analysis further revealed strong Li⁺ binding energy of up to -5.72 eV, indicating favorable adsorption thermodynamics. To bridge material performance with scalable operation, a continuous fixed-bed system was implemented. Under optimized conditions, the Li-PNFs achieved a lithium capture efficiency of 23.83% in a single-pass continuous experiment. Breakthrough behavior was successfully predicted using the Clark and Thomas models, demonstrating reliable dynamic adsorption modeling. Finally, a dual-functional MoS2–LDH@Sponge composite was developed to integrate photothermal evaporation with lithium-selective adsorption. The bilayer architecture achieved broadband light absorption (>97%) and demonstrated a dynamic hydration-controlled adsorption mechanism. Photothermal stimulation initially enhanced ion transport and interfacial evaporation, followed by hydration-shell restructuring that modulated lithium mobility. This work establishes a multi-scale framework that couples electronic modulation, nanoscale architecture, continuous process engineering, and solar-driven energy input for sustainable lithium recovery.
Author: Pan, Yanan
Language: English
Open Access status: green
OpenAlex ID: W7160745369
Cites: 198
Cited by: 1
Related to: 10