Work

Microstructure and Properties of Surface Metal-Matrix Composite Reinforced with the Product of Vitrification of Asbestos-Cement Waste and CRT Glass Cullet

Year: 2026

Type: article

Abstract: The main aim of the work was to analyse the microstructure and selected properties of a metal-matrix surface composite reinforced with a product of vitrification of asbestos-cement waste (ACW) and glass cullet from cathode-ray tubes (CRTs). The composite matrix was an AA7075 (Al-5.5Zn-2.4Mg-1.6Cu-0.2Cr) aluminium alloy. The FSP (friction stir processing) method was used to produce the composite. The composites were tested in the context of the possibility of using vitrified material as a substitute for other reinforcing materials. As a result of treatment, a composite surface layer was obtained, characterised by uniform distribution of the reinforcing phase with a good bond with the matrix. This process was accompanied by strong grain refinement in the stirring zone and partial dissolution of intermetallic phases. These microstructural changes, combined with the introduction of hard particles into the metal-matrix, resulted in a significant increase in the composite's hardness and wear resistance. As a result of the conducted research, it was found that using the product of vitrification of ACW and CRT cullet in the composites manufacturing process is beneficial, as it is not only a competitive solution to other reinforcing phases, but also an effective way to manage waste hazardous to the environment and humans, thus adding new functionalities to products processed in this way.

Source: Materials

DOI: 10.3390/ma19101962

Authors: Józef Iwaszko, Krzysztof Kudła, Małgorzata Lubas

Institution: Częstochowa University of Technology

Language: English

Topic: Aluminum Alloys Composites Properties

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Responsible consumption and production

Open Access status: gold

Estimated APC paid: $3,137