A 90.4% Efficiency Hybrid Step-Up Converter with Clock-Free Controller and Shunt-Current-Reusing Techniques for Power Burst Applications
Year: 2026
Type: article
Abstract: This article presents a low ripple, high voltage-conversion-ratio (VCR = 6), two-stage step-up converter intended for power-burst applications. The first boost stage raises the battery voltage to a maximum of 35 V, while the subsequent low dropout regulator (LDO) stage suppresses the ripple of the final output. Unlike conventional structures in which control circuits operate above a ground-referenced rail, the proposed shunt-current-reusing technique places most of the control circuits within a narrow floating dropout region (VDROP) between the boost output (VBST) and the LDO output (VOUT), thereby achieving nearly 100% current efficiency through current recycling. Adaptive adjustment of VDROP (0.5 V at light load and 0.65 V at heavy load) balances output ripple against the loss of the LDO stage. Consequently, the proposed converter achieves both high efficiency (>85%) and low ripple (<2 mV) over a load range from 200 μA to 100 mA, with a peak efficiency of 90.4% at a 20 mA load. Hysteretic control of the boost stage combined with the high bandwidth (BW = 1.2 MHz) of the LDO stage yields a fast transient response (<20 μs). The proposed techniques address the requirements of applications that demand high intermittent power bursts (>1 W) at high supply voltage (>20 V) while maintaining low quiescent current consumption under most load conditions (<10 mA), as exemplified by light detection and ranging (LiDAR), haptic sensors, and micro electromechanical system (MEMS) drivers.
Source: Electronics
Authors: Pengda Qu, Zhiming Xiao, Yue Zhao
Institution: Nankai University
Language: English
Topic: Advanced DC-DC Converters
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7160853614