Hydraulic Performance of Multi-Phase Extraction Wells: From Laboratory Analysis to Field Validation
Year: 2026
Type: article
Abstract: Subsurface contamination at low-permeability petrochemical sites necessitates long-term multi-phase extraction (MPE), yet operational sustainability is frequently compromised by well-bore clogging. This study develops a “prevent–identify–remediate” strategy through integrated laboratory and field-based investigations. Laboratory bench tests identified a critical packing density threshold of 70%, above which permeability loss escalates rapidly. Furthermore, rounded quartz sand maintained a significantly higher permeability ratio (0.4) compared to irregular zeolite (0.1). These findings were validated through a longitudinal two-year field pilot study in a silty-clay formation. Innovative large-diameter wells (200 mm) utilising optimised quartz sand showed high resilience, with only a 20% reduction in discharge capacity over 24 months. In contrast, conventional wells using local yellow sand exhibited severe physical clogging, resulting in a 57% decrease in stable flow. The study also characterised a diameter effect, where small-diameter wells (63 mm) proved inherently more vulnerable to rapid performance degradation regardless of filter media. To address existing impairment, high-pressure water jetting and dilute hydrochloric acid washing restored flow capacity by 50% and 40%, respectively. By coupling mechanistic insights with field evidence, this research provides a comprehensive platform for the sustainable design and maintenance of subsurface remediation infrastructure, ensuring long-term operational efficiency and reduced resource consumption.
Source: Environments
Institutions: SGIDI Engineering Consulting (China), Tongji University
Language: English
Subfield: Environmental Engineering
Field: Environmental Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,172
Awards: G128391782, G6005321215
OpenAlex ID: W7160855128