Work

Study on control strategy optimization and performance analysis of a PV/T-coupled transcritical CO2 heat pump system with ejector and vapor injection based on environmental mode switching

Year: 2026
Type: article
Abstract: PV/T (photovoltaic/thermal) coupled heat pump systems can enhance overall energy utilisation by cascading solar energy from “light-to-electricity-to-heat”. This paper proposes a PV/T-coupled ejector–vapor-injection enhanced transcritical CO 2 heat pump with multi-mode operation (PV/T-EIHP) to improve heating performance under low ambient temperatures. A steady-state thermodynamic model incorporating a stratified thermal storage tank was developed for the dual-source PV/T system, and mode-dependent optimal high-side pressure correlations were fitted and embedded to facilitate consistent system calculations. Based on a comparative evaluation of three operating modes—Ejector Vapor Injection Mode (EVIM), Sole Ejector Mode (SEJM), and the baseline air-source mode (BASM)—a practical mode-switching strategy was derived for low-temperature operation. Typical winter-day simulations were then conducted for Luntai, Xinjiang to assess both thermal and electrical performance. Results show that applying the calculated switching rule (SEJM for evaporating temperature ≥ 5°C and EVIM otherwise) increases the COP of PV/T-EIHP by 5.32%–14.03% relative to the PV/T-DSHP system. The daily average COP reaches 2.87 on a typical sunny day and 2.33 on an overcast day. On sunny days, the PV/T subsystem achieves a daily average overall conversion efficiency of 31.4%, and PV power covers 67.74% of the heat pump electricity demand during irradiation hours. The findings provide guidance for performance-oriented design and operation of PV/T dual-source transcritical CO 2 heat pump systems under cold-climate conditions.
Language: English
Open Access status: hybrid
Estimated APC paid: $4,600
Award: G778577885
OpenAlex ID: W7161548599
FWCI: 3.823
Cites: 48
Cited by: 2
Related to: