Towards eco-efficient mortars: influence of fly ash fineness and content on strength, durability, and microstructural behavior
Year: 2026
Type: article
Abstract: Global net-zero commitments are accelerating the transition toward low-clinker, high-performance binders. This study systematically investigates the combined effects of fly ash (FA) fineness and replacement level on the mechanical performance, transport resistance, and hydration stability of eco-efficient mortars incorporating ground granulated blast-furnace slag. Three FA fineness levels—Fa1 (277.2 m 2 kg −1 ), Fa2 (299.6 m 2 kg −1 ), and Fa3 (313.5 m 2 kg −1 )—were evaluated at 10%–40% cement replacement. Compressive strength, porosity, water absorption, rapid chloride penetration, scanning electron microscopy, x-ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis were integrated to establish microstructure–performance relationships. Although increasing FA content reduced 28 d strength by 1.2%–29.8%, FA-modified mixtures exhibited significantly greater long-term strength gains (25%–64%) than the control (17%). At 30% replacement, fineness became decisive: Fa3-30 achieved 94.93 MPa at 180 d, with 5.87% porosity, 2.34% water absorption, and 779 Coulombs. Regression analysis identified porosity as the primary structural control parameter, with each 1% increase corresponding to an 8.9 MPa strength reduction and a 243 Coulombs increase. Thermogravimetric and spectroscopic evidence indicate that finer FA enhances gel polymerization, stabilizes bound water, and promotes hydrate network maturation. Within the investigated compositional domain, 30% ultrafine FA provides the most favorable balance among mechanical performance, pore refinement, transport resistance, and clinker reduction efficiency.
Source: Engineering Research Express
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $2,400
OpenAlex ID: W7162118594
