Work

Post-processing strategies for generative design outcomes in a UAV tail boom

Year: 2026
Type: article
Abstract: Generative design produces structurally efficient geometries whose complex, organic shapes require post-processing before they can be manufactured by fused filament fabrication (FFF). This paper compares two post-processing strategies applied to the same generative design outcome for the tail boom of an unmanned aerial vehicle (UAV). The first, complex variant follows the raw topology closely; the second, simplified variant uses symmetric arms, self-supporting geometry, and uniform cross-sections oriented toward FFF manufacturability. Both variants were evaluated by finite element analysis (FEA) comprising linear static and buckling studies under identical loading conditions, and scaled prototypes of the simplified variant were printed in two bounding infill configurations and load-tested. The simplification reduced mass by 4% and print time by 20% while eliminating support structures, at the cost of a 31% increase in peak stress, which remained below 2% of the ultimate tensile strength assumed in the FEA model. Stress concentrations predicted by FEA were qualitatively consistent with the fracture locations observed in testing. Within the studied case and under the analyzed quasi-static loads, the stress increase did not change the assessment of load-bearing adequacy, indicating that manufacturing-oriented simplification of generative design outcomes can improve printability while reducing print time and material use.
Language: English
Open Access status: hybrid
Estimated APC paid: $3,990
OpenAlex ID: W7162629429
FWCI:
Cites: 31
Cited by:
Related to: 10