Year: 2018
Type: dissertation
Abstract: This thesis focuses on the bit error rate (BER), which has not been predicted for crosspoint memories, though it is one of the most important parameters to design the error correcting code (ECC) for realizing high-density products, and the thesis aims to propose bit error rate (BER) simulation models for large-scale cross-point memories and to verify their validity for practical purposes.Resistive random access memory (ReRAM) is one of the most promising candidates for the replacement of NAND Flash memory, which is widely used for data storage in information products as mentioned in Chapter 1.When ReRAM is composed of cross-point arrays, it offers the potential for large-scale data storage with a smaller cell size than that of NAND Flash memory.In a cross-point array, memory elements are sandwiched between orthogonally patterned word-lines (WLs) and bit-lines (BLs).Thus, cell sizes of 4F 2 are possible, where F is the feature size of a technology node, making cross-point arrays suitable for high-density ReRAM.The proposed models are applicable to any type of cross-point memory, including ReRAM and magnetic random access memory (MRAM), because the cross-point array is composed of memory elements in which the resistivity can be changed by applying an electric current.Both ReRAM and MRAM suffer disturbances at the non-selected address while data are being written to the selected address.The BER caused by these disturbances can be calculated by the proposed models.As these two memories have different device parameters that affect the disturbance, this thesis investigates the effect of the device parameters on the BER for ReRAM and MRAM.As described in Chapter 2, there are two major issues preventing the realization of largescale cross-point memories.The first is the trade-off relationship between the disturbance and Thesis objective Presenting simulation models for cross-point memory to realize the low cost storage products.Chapter 2 Clarification of issues to realize large-scale cross-point memory.Chapter 3 Proposal of statistical method for calculating the BER.Chapter 4 Proposal of new simplified circuits for fast computing.Chapter 6 Description of calculation sequence for the BER.Chapter 7 Discussion of calculation results.Chapter 8 Application of ECC to cross-point memory to enhance yield.Chapter 10 Conclusions of this study.Chapter 5 Verification of the new simplified circuits. Chapter 1 Introduction of this study addressing background of large-scale memories.Chapter 9 Device design of MRAM.
Author: 浅尾, 吉昭
Institution: Toyo University
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
Funder: Toyo University
OpenAlex ID: W7162705746
