A Simplified Method for Computing Mechanical Properties of High-performance Low-cost Seismic Isolators
Year: 2018
Type: article
Abstract: An innovative high-performance low-cost isolator was presented for seismic isolation in economic underdeveloped regions. When this proposed isolator is applied to replace steel sheets with engineering plastic plates within a traditional isolator, the methods of flexible-reinforcement isolators must be used to calculate its mechanical properties . The analytical solutions for this type of isolators are complicated and not easy for engineering application, therefore a simplified method was put forward for computing the simplified solutions for analytical strength, stiffness and stress of the isolator under compression and bending, in which the weighted residual method was employed based on optimal selection of trial functions and the undetermined coefficients of the trial functions were determined by accuracy requirement. Therefore, the simplified formulas of stress distribution, compression stiffness, bending stiffness and strength were formulated and obtained herein. And a characteristic parameter was introduced to analyze the variation of these formulas. Parameter analysis showed that the error of the proposed formulas increases with the increase of the aspect ratio and the characteristic parameter. Subsequently, the valid application scope of these simplified formulas is given. Finally, systematic experimental tests of four different groups of the presented isolators were carried out. Test results showed that, for typical high-performance low-cost isolators, the deviation of the proposed formulas is close to that of the analytical formulas, which verifies the effectiveness of the simplified formulas and the rationality of the proposed method. The proposed method can be extended to isolators in any other shape and of different reinforcing materials, which is propitious for the popularization and application of high-performance low-cost isolation technology in less developed areas.
Authors: Ping TAN, Han LIU, Yafei ZHANG, Fulin ZHOU
Language: Chinese
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7162822218
