A novel optical scanning system for laser machining of vertical sidewall
Year: 2026
Type: article
Abstract: Despite its many advantages, laser micromachining has limitations, such as tapering due to plasma-induced distortion, gaussian beam profiles, and defocusing effects. Although process parameter optimization and adjusting the angle-of-incidence (AOI) have been investigated to reduce tape angle of the sidewall, existing approaches often require complex process optimization, workpiece tilting, or multi-axis scanning systems. In this study, we developed a novel optical scanning system consisting of three spherical lenses and a 2D galvanometer scanner to enable AOI variation using a simplified optical configuration. To overcome the tapering limitations of machined surfaces, this study developed a novel optical scanning system and proposed a derived machining process. The proposed optical scanning system controls the AOI of the laser beam on the sample surface through a novel arrangement of spherical lenses. The experimentally measured AOI showed good agreement with the optical simulation, confirming the validity of the proposed optical system. Under optimized machining conditions of a fluence of 2.97 J/cm 2 , an overlap ratio of 10 %, and a scan number of 100, a near-vertical sidewall with a taper angle of 0.7° was achieved at an AOI of 4.058°. Furthermore, we observed that the taper angle during machining was highly sensitive to the AOI. The proposed method has the potential to limit the formation of taper angles in conventional laser machining and enhance industrial applicability through an optical design-based AOI control system.
Source: Optics & Laser Technology
Authors: Jaehee Kim, Dongsik Kim, Hyun Choi, Jeonghong Ha
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,230
OpenAlex ID: W7164195490
