Work

Analysis of Winding Losses in Permanent Magnet Synchronous Motors with Multilayer Thin Flat-Wire Windings

Year: 2026

Type: article

Abstract: Flat-wire windings have been widely used in high-power-density electric vehicle motors because of their high slot fill factor and high efficiency. However, conventional flat-wire conductors usually have relatively large cross-sectional dimensions, which may lead to significant AC winding losses under high-frequency operation due to the combined effects of the rotor magnetic field and the armature-reaction field. To address this issue, this paper proposes a multilayer thin flat-wire continuous-wave winding and its end-winding transposition method. The parallel multilayer thin flat-wire structure effectively suppresses AC losses by reducing the characteristic dimension of each conductor, while the end-winding transposition method reduces or even eliminates circulating-current losses among parallel strands without compromising slot utilization. An analytical calculation method is established to investigate the AC loss characteristics of the multilayer thin flat-wire winding, and the main influencing factors of winding losses are analyzed. To address the circulating-current loss issue, the loss suppression effect of the transposition method is quantitatively evaluated, and an intermittent transposition method with both effective circulating-current suppression and fewer end-winding crossovers is proposed. Finally, the proposed method is validated by finite-element analysis (FEA) and prototype experiments. The results show that the proposed winding can significantly reduce AC losses over a wide speed range, providing a low loss and manufacturable winding design solution for high-power-density electric vehicle traction motors.

Source: Electronics

DOI: 10.3390/electronics15122665

Authors: Simeng Zhong, Xiaoting Zhang, Aimin Liu, Bingyi Zhang, Yongpeng Cao, Decai Liu

Institutions: Shenyang University of Technology, Xiamen Tungsten (China)

Language: English

Topic: Electric Motor Design and Analysis

Subfield: Electrical and Electronic Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Affordable and clean energy

Open Access status: gold

Estimated APC paid: $2,896