p-GaN Layer Etch Engineering for Defect Reduction in 200 mm Enhanced-Mode AlGaN/GaN HEMT Processing
Year: 2026
Type: article
Abstract: Gate definition is a major challenge in p-GaN gate AlGaN/GaN HEMT structures because of the high selectivity and low plasma damage required during the etching process. In this work, self-terminated etching, developed to limit surface damage and loss of the underlying AlGaN layer, is investigated. A comparison of two over-etch chemistries (Cl2/O2/N2 and BCl3/SF6) revealed that the oxygen-based process yields superior results in terms of AlGaN surface morphology, producing a smoother surface and a more conformal p-GaN profile, while the fluorine-based process exhibited more anisotropic behavior, leading to p-GaN residues and surface pitting. To address across-wafer non-uniformity, a temperature gradient strategy using the tunable electrostatic chuck was developed. The optimized process was evaluated through automatic defect control and device robustness under drain bias-stress. A total reduction in defectivity and reliable HEMT devices across the wafer under high drain-source bias were achieved. These results demonstrate the effectiveness of the proposed solution, offering significant improvements in process efficiency and manufacturability.
Source: Electronics
Authors: Pauline Gaillard, Sébastien Avertin, Julien Drieu La Rochelle, Mohammed Zeghouane, Hyon-Ju Chauveau, Giovanni Giorgino, Aurore Constant, Ferdinando Iucolano
Institutions: STMicroelectronics (France), STMicroelectronics (Italy)
Language: English
Subfield: Condensed Matter Physics
Field: Physics and Astronomy
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7165045516