Year: 2026
Type: article
Abstract: Diamond, an ultrawide bandgap semiconductor with exceptional thermal, optical, and electrical properties, has attracted significant interest for next-generation electronic applications. However, its integration into micro and optoelectronic devices remains limited by doping challenges. Herein, pulsed laser irradiation (PLI) is employed as an approach for controlled boron doping in diamond. Boron incorporation is achieved via immersion in a boric acid precursor, followed by PLI at 0.34 J cm −2 to induce p-type conductivity in a patterned 5 × 5 mm 2 lab-grown HFCVD polycrystalline diamond (PCD). To mitigate laser-induced defects and suppress graphitization, a subsequent low-energy irradiation at 0.17 J cm −2 is applied. After an initial 500-pulse high-energy treatment, the quality factor (Q.F.) decreases from 94.01% to 93.70%, but recovers to 94.16% following 4000 pulses of low-energy exposure, yielding a net improvement of ∼0.5%. The treated sample exhibits a carrier concentration of +4.46 × 10 19 cm −3 and a hole mobility of 0.594 cm 2 V −1 s −1 . When applied to a commercial MSE PCD sample ( R a < 1 nm), this treatment maintains a Q.F. of 100% and reduces the transpolyacetylene (TPA) peak intensity by 43.08%. Electrical measurements reveal a carrier concentration of 1.166 × 10 19 cm −3 and a hole mobility of 7.09 cm 2 V −1 s −1 . These results demonstrate a practical route for achieving reliable p-type doping and improved structural quality in diamond for advanced electronic applications.
Institutions: Texas State University, Rice University
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,325
OpenAlex ID: W7166675664
