Thermally-Sintered Aluminum Composites with Low Melting Point Metals for Hydrogen Production Through Water Splitting Reaction
Year: 2025
Type: dissertation
Abstract: This study investigates aluminum activation by thermal sintering using liquid metals (gallium, eutectic Ga-Sn alloy, and eutectic Ga-Sn-In alloy) as activating agents for hydrogen production via water splitting reaction.Aluminum foils are sprayed with liquid metal particles then thermally sintered to produce aluminum composites that react spontaneously with water at ambient conditions to produce hydrogen.Composites of aluminum with gallium react very slowly (10-20 hours) with water at high temperature (~70 o C).Interestingly, the reaction of aluminum composites with eutectic alloys of Ga with Sn and Sn-In is extremely fast (3-18 minutes) in comparison to those with Ga metal.Aluminum composites with Ga-Sn achieved a very high reaction rate with an intermediate yield, while the composites with Ga-Sn-In achieved a higher yield at a slower rate.Hydrogen yield increases with the increase of liquid metal ratio in aluminum composites with Ga and Ga-Sn, and plateaus after a specific ratio.However, hydrogen yield from aluminum composites with Ga-Sn-In significantly decreases with the increase in the liquid metal ratio due to the formation of In-Sn intermetallic compounds that prevent Sn and In from participating in the water splitting reaction.The reaction rate is highly dependent on reaction temperature, for instance increasing the reaction temperature by 20 o C leads to reducing the reaction time from 65 minutes to 10 minutes.The composites have a very long shelf life and retain more than 70% of their activity after storage for three months in ambient conditions.
Author: Raby, Md Hasan
Institution: King Fahd University of Petroleum and Minerals
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7167167370
