Farklı Sıkıştırma Basınçları Altında Toz Metalurjisi ile Üretilen Magnezyumun Korozyon ve Yüzey Pürüzlülüğü Özellikleri
Year: 2026
Type: article
Abstract: In this study, pure magnesium (Mg) powder particles were produced by PM at different compaction pressure (100, 200, and 400 MPa). The effects of compaction pressure on the microstructure, corrosion behavior, and surface roughness of Mg have been investigated in detail. The microstructures of Mg samples produced at different compaction pressures were examined using Scanning Electron Microscopy (SEM+EDS). Mechanical properties were evaluated using density, microhardness, corrosion behavior, and surface roughness. Corrosion tests were performed using the potentiodynamic polarization method in a 3.5% NaCl solution. In conclusion, SEM images showed that increasing the pressure reduced oxidation at grain boundaries. It was observed that as the compaction pressure increased, the Mg density increased, the porosity decreased, and the powder particles could be compressed to a high degree. Corrosion resistance increased with increasing compaction pressure; the highest corrosion resistance was observed in the Mg sample subjected to 400 MPa at 3.01 mm/year, while the lowest was observed in the Mg sample subjected to 100 MPa at 11.09 mm/year. Furthermore, surface roughness tests conducted before and after corrosion analysis revealed that samples produced under a compaction pressure of 400 MPa exhibited better surface roughness than those produced under 100 MPa.
Author: Tuncay, Badegül
Institution: Sivas Bilim ve Teknoloji Üniversitesi
Language: Turkish
Subfield: Biomaterials
Field: Materials Science
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7167168324
