Optimization of nozzle geometry for improving bottomhole cleaning efficiency in roller cone drilling
Year: 2026
Type: article
Abstract: This paper develops an engineering-analytical framework that links roller cone bit nozzle geometry directly to the specific hydraulic energy E s required per metre drilled. A submerged free-jet decay relation, a cuttings-particle force balance and a Shields-type incipient-motion criterion are coupled to define the minimum wall-jet velocity for cuttings lift-off, which is imposed as a hard constraint in a constrained optimization of the nozzle diameter d n , inclination angle θ and stand-off distance h . The problem is solved by parametric grid search and five representative configurations are compared. The recommended optimum ( d n = 18 mm, θ = 20°, h = 50 mm) lowers E s from 35.95 to 5.04 MJ/m (an 86 % reduction) and raises the predicted rate of penetration from 11.3 to 22.0 m/h (+95 %) relative to a conventional pressure-based arrangement, at the same flow rate and number of nozzles. A one-at-a-time sensitivity study confirms that the optimum is robust to the model calibration constants. Geometry-based redistribution of hydraulic energy is thus more effective, and more sustainable, than pressure-based intensification of the flushing flow.
Source: Vibroengineering PROCEDIA
Authors: Dilobar Nazarbekova, Bekzod Nurtoev
Language: English
Subfield: Ocean Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7168501380