Temperature-Invariant High-Resolution Imaging for Automotive Cameras Using Collaborative Passive Compensation
Year: 2026
Type: article
Abstract: Thermal-induced degradation of modulation transfer function (MTF) and image sharpness in automotive camera modules under large real-world temperature variations is a key bottleneck for the safe deployment of level 3 and higher advanced driver assistance systems. To address this challenge, a collaborative passive compensation framework is proposed to maintain high-resolution imaging performance across extreme temperature conditions. Within this framework, an elastic spacer is embedded into the lens stack as an additional optical design degree of freedom. This carefully engineered element expands the thermal focus compensation capability of the lens assembly and suppresses inherent back focal plane (BFP) drift within a narrow range through coordinated opto-mechanical coupling optimal design. Then, a metal stiffener plate is introduced to tailor the thermo-mechanical deformation behavior of the detector-mounted printed circuit board. By optimizing the thickness of the stiffener plate, the residual thermally induced BFP drift of the overall opto-mechanical system is effectively counteracted, enabling global opto-mechanical–thermal equilibrium. Experimental results from the prototype camera module demonstrate that, over an ultra-wide temperature range from −40 °C to +95 °C, the maximum absolute BFP mismatch between the lens optical focus plane and the image sensor plane is constrained within ±1 μm, achieving ∼90% reduction compared with conventional optical-only athermalization approaches. At a spatial frequency of 119 lp/mm, the MTF at the center and the left/right 0.7-field positions consistently exceeds the design threshold of 0.5 with negligible degradation throughout the full temperature range. These results demonstrate that the proposed approach enables a fully passive, temperature-invariant automotive camera module, achieving an optimal balance among compactness, cost efficiency, and robustness under harsh automotive operating conditions.
Source: Sensors
DOI: 10.3390/s26227321
Authors: Kouwen Zhang(Conceptualization, Investigation, Methodology, Writing – original draft), Zhaoqing Liu(Data curation, Formal analysis, Investigation, Software, Writing – original draft, Writing – review & editing), Xiaoyang Lin(Writing – review & editing), Shenwei Xu(Software, Visualization, Writing – original draft), Junyu Zhou(Resources, Writing – review & editing), Yan Li(Resources), Haoyun Wei(Funding acquisition, Supervision, Writing – review & editing)
Institution: Tsinghua University
Language: English
Subfield: Atomic and Molecular Physics, and Optics
Field: Physics and Astronomy
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
Awards: G1730176701, G2636345437, G2995750129
OpenAlex ID: W7171453749
