Structure-Aware Design of a Partially Overlapped Segmented Transmitter with a Position-Dependent Excitation Strategy for Automotive Power-Seat Wireless Power Transfer Under Wide Misalignment
Year: 2026
Type: article
Abstract: Wireless power transfer (WPT) can eliminate moving power-supply harnesses in automotive power-seat systems, but seat travel and nearby metallic structures cause substantial variations in magnetic coupling and electromagnetic loss. This paper proposes a structure-aware, partially overlapped segmented transmitter and evaluates two predefined excitation states according to receiver position. In the single-segment state, only the reference segment CP1 is energized; in the simultaneous dual-segment state, CP1 and the adjacent segment CP2 are energized together. Three-dimensional finite element method (FEM) simulations compare candidate transmitter structures and evaluate the electromagnetic influence of the aluminum lower rail, steel upper rail, and steel seat frame. The transmitter geometry is determined by considering mutual inductance, winding loss, structural eddy-current loss, and partial-overlap characteristics. A three-coil equivalent circuit clarifies the branch-current distribution, and a two-state switched-capacitor network accommodates the different equivalent transmitter impedances. A 100 W, 110 kHz prototype separately evaluates representative states at x = 0 and 80 mm; automatic position-based state switching is not implemented. At x = 0 mm, CP1-only excitation achieves 78.79% efficiency. At x = 80 mm, CP1 + CP2 excitation produces 32.13 V and 72.15%, compared with 18.78 V and 67.84% under CP1-only excitation, thereby satisfying the 30 V minimum output requirement.
Source: Electronics
Authors: Chang-Su Shin, Dong-Hee Kim, Geun Wan Koo
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
Funder: Korea Electric Power Corporation
Award: G6348702933
OpenAlex ID: W7203881797