Work

Effect of Mechanical Grinding and H3PO4 Activation Ratio on the Adsorption Performance of Ficus nitida-Derived Activated Carbon

Year: 2026

Type: article

Abstract: Activated carbon is a highly porous adsorbent material that is often used to treat wastewater using physical and chemical adsorption. Agricultural and urban biomass waste valorization to activated carbon is a low-cost, renewable solution to commercial adsorbents, and can help prevent waste from tree pruning from being dumped in landfills or openly burned. In this study, the ability of the ground and unground Ficus nitida leaves to efficiently adsorb Rhodamine B dye and total chromium from model aqueous solutions was investigated. Chemical activation was performed using phosphoric acid (H3PO4) at different impregnation ratios (1:1, 2:1, and 4:1). Samples obtained as a result of the above activation were labeled G1–G3 (ground) and UG1–UG3 (unground). The adsorption test showed that the samples with the highest activation ratio (G3 and UG3) gave the best results, removing 92% and 94% RhB, respectively, in 20 minutes. After 24 h, sample G3 showed the best efficiency of 73.31% (13.35 ppm remaining) in chromium removal, where the adsorption kinetics were well described by the pseudo-second-order model (R2 > 0.98), indicating that there may be some chemical interactions occurring during the adsorption process along with physisorption, and the RhB adsorption isotherms for sample UG3 were well described by the Langmuir isotherm (R2 > 0.95). The higher activation ratio and grinding increased the carbon content (up to 90% C for G3), surface functional groups, and textural properties (BET surface area of 699 m2/g and total pore volume of 3.06 cm3/g). Furthermore, reusability tests over five consecutive cycles demonstrated the excellent recyclability of sample G3, retaining removal efficiencies of 80.5% for RhB and 50.2% for total chromium. The results revealed that Ficus nitida leaf-based AC can be used as an efficient, economical, and reusable adsorbent material for sustainable environmental cleanup and water purification systems and will create a circular economy for waste management.

Source: Sustainability

DOI: 10.3390/su18168574

Authors: Hassan R. S. Abdellatif, Heba G. R. Younis, Fatma Abdelrhman, Ehab Mostafa, Mariam A. Amer

Institutions: Cairo University, Agricultural Research Center, Agricultural Engineering Research Institute

Language: English

Topic: Adsorption and biosorption for pollutant removal

Subfield: Water Science and Technology

Field: Environmental Science

Domain: Physical Sciences

SDGs: Responsible consumption and production, Clean water and sanitation

Open Access status: gold

Estimated APC paid: $2,896