Design, Simulation and Fabrication of Dual-band Microstrip Patch Antenna
Year: 2026
Type: article
Abstract: DESIGN, SIMULATION AND FABRICATION OF DUAL-BAND MICROSTRIP PATCH ANTENNA 1Dipan Das, 2Surajit Mukherjee 1UG Student, Department of ECE, Haldia Institute of Technology, Haldia, West Bengal 2Assistant Professor, Department of ECE, Haldia Institute of Technology, West Bengal, India ABSTRACT This paper presents the design, simulation, and prototype realization of a compact dual-band microstrip patch antenna intended for wireless applications. A dual-band dual-mode structure that resonates at 2.7 GHz and 5.3 GHz is obtained by inserting two parallel I-shaped slots into the radiating patch. The slots create the second resonance while preserving a simple, low-profile geometry. The antenna is first dimensioned with the standard microstrip design equations and then refined through parametric sweeps in HFSS/CST on a 1.2 mm thick Arlon substrate (εᵣ = 2.2). The optimized design yields return losses of –21.38 dB at 2.7 GHz and –23.04 dB at 5.3 GHz, together with broadside gains of approximately 7.33 dB and 7.38 dB, respectively. Radiation-pattern analysis shows predominantly broadside radiation at the lower frequency and additional lobes at 5.3 GHz arising from higher-order modes. A physical prototype is fabricated by PCB etching, fitted with an SMA connector, and measured. The measured results confirm the simulated performance, demonstrating that the antenna is well suited to compact dual-band use in WLAN, LTE and related
Authors: Dipan Das, Surajit Mukherjee
Language: English
Topic: Antenna Design and Analysis
Subfield: Aerospace Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7203896395
FWCI:
Cites:
Cited by:
Related to: