Work

Fe-Ni Bimetallic Modified HZSM-5 for Efficient Preparation of Monocyclic Aromatic Hydrocarbons via Co-Pyrolysis of PET and LDPE

Year: 2026

Type: article

Abstract: Plastic waste has become a serious global issue. Thermal treatment of waste PET faces critical drawbacks including severe reactor clogging and low-value oxygen-rich bio-oil, restricting large-scale chemical recycling. Co-pyrolysis with hydrogen-rich low-density polyethylene (LDPE) over modified zeolite provides a viable route to overcome these barriers. In this study, reaction parameters including temperature, plastic/catalyst ratio and PET/LDPE ratio were optimized, and Fe-Ni bimetallic modified HZSM-5 was fabricated via impregnation to boost monocyclic aromatic hydrocarbons (MAHs) production. LDPE served as a hydrogen donor to facilitate PET deoxygenation via synergistic effects. At 550 °C with a plastic/catalyst ratio of 1:4 and PET/LDPE ratio of 2:3, the liquid yield hit 80.2%, and all detectable organic compounds in the liquid phase identified by GC–MS were aromatic hydrocarbons. Among all prepared mono- and bimetallic zeolites, 3Fe7Ni/HZ delivered optimal MAHs selectivity at 80.5%. This 20% promotion over unmodified HZSM-5 stems from balanced metal dispersion and tuned acid sites unique to Fe–Ni co-loading. This work offers a feasible strategy for converting waste plastics into high-value aromatics and further trials with varied metal contents will be needed to extend industrial applicability.

Source: Catalysts

DOI: 10.3390/catal16090761

Authors: Haijian Yang, Changsen Zhang, Lianfeng Shang, Hanfang Feng, Na Xiao

Institutions: Huanghe Science and Technology College, Zhengzhou University

Language: English

Topic: Zeolite Catalysis and Synthesis

Subfield: Inorganic Chemistry

Field: Chemistry

Domain: Physical Sciences

SDG: Responsible consumption and production

Open Access status: gold

Estimated APC paid: $2,654