Evaluation of Fracture Conductivity and Proppant Placement Patterns in Discontinuously Propped Fractures
Year: 2026
Type: article
Abstract: Shale gas is a major unconventional energy resource in China. Its low porosity and permeability require large-scale volumetric fracturing to create conductive fracture networks. However, most induced fractures are propped discontinuously because shale reservoirs are geometrically complex. Fracture conductivity and proppant placement efficiency therefore directly control stimulation performance. Following SY/T 6302-2009, this study used linear flow-through experiments and a large-scale visual fracture simulation system to investigate the effects of proppant particle-size distribution, injection sequence, flow rate, and closure pressure on fracture conductivity and placement. The results show that the 20/40:40/70 mesh dual-particle-size combination at a 3:2 ratio provides the best overall performance. A fine-particle content of no more than 16.7% limits conductivity loss and improves the match between particle size and fracture aperture. Multilayer placement at fracture corners distributes high-stress loading and maintains conductivity. Injecting 70–140 mesh fine proppant before 40–70 mesh coarse proppant at 3.6 m3/h improves transport distance, coverage, and placement uniformity. The optimized scheme maintains stable conductivity at closure stresses of 10–80 MPa and achieves at least 95% propped-area coverage. These findings provide experimentally supported parameters for discontinuous propping and can inform shale gas fracturing design.
Source: Processes
DOI: 10.3390/pr14172733
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7204277982