Fabrication and Characterization of Linseed Oil-based Membranes for Ion Sensor Applications
Year: 2026
Type: other
Abstract: Poly(vinyl chloride) (PVC) is widely used as the membrane matrix in conventional polymeric ion-selective electrodes. However, its non-biodegradable nature and the environmental concerns associated with commonly used plasticizers motivate the investigation of greener materials for ion-selective membranes. This work investigated the use of polymerized linseed oil as a membrane matrix for ion-selective electrode applications. The membrane fabrication method, composition, and curing conditions were optimized to produce smooth, mechanically stable membranes with low electrical resistance suitable for potentiometry. Membranes containing different conductive carbon fillers were characterized by electrochemical impedance spectroscopy (EIS) to estimate their resistance, while cyclic voltammetry (CV) and potentiometry were used to evaluate their redox sensitivity. The optimum membrane was subsequently investigated for its ion-exchange properties and potassium ion selectivity. Among thermal curing and UV-assisted curing, thermal curing was found to be the faster curing method under the investigated conditions. A curing temperature of 100 °C for 18–25 h produced smooth, mechanically stable membranes in the presence of an optimum concentration of methyl linoleate as a reactive diluent. The membrane selected for further studies consisted of 66.5 wt% linseed oil, 28.5 wt% methyl linoleate, and 5 wt% multi-walled carbon nanotubes (MWCNTs), with 300 µL of 2-methyltetrahydrofuran added as a solvent during preparation. The solvent is not included in the mass percentages, as it evaporates during curing. Throughout this thesis, this membrane is referred to as the base membrane. The base membrane functioned as a cation exchanger, showing potentiometric responses towards K⁺, Na⁺, NH₄⁺, H⁺, and Ca²⁺ with sub-Nernstian slopes. Quantitative ³¹P NMR analysis showed that curing increased the concentrations of hydroxyl and carboxylic acid groups, which are suspected to act as fixed negative sites responsible for the cation-exchange behavior. The addition of 1–3 wt% TDMACl (tridodecylmethylammonium chloride) compensated these native sites and suppressed the concentration-dependent potentiometric response over the KCl concentration range of 10⁻⁶–10⁻³ M. Though none of the membranes prepared with different concentrations of valinomycin and ion-exchangers could be made selective towards potassium ions like conventional PVC-based membranes are, this work provides new insights into the ion-exchange properties of polymerized linseed oil-based membranes.
Source: Doria (University of Helsinki)
Author: Haider, Syed Ibtisam
Language: English
Subfield: Analytical Chemistry
Field: Chemistry
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7204609274
